Daily Blog #11

Daily Blog #11
Friday, May 10, 2019
I spent  5 hours in the forge today and 1 doing research on how to put a handle on my shield.   
Today was all about learning how to braze my shield and planning out how I was gonna form the oval shape. I will be working on the shaping of the shield or tomorrow using a piece of wood burned a hole. The hole will allow me to hammer out the metal in the way that I want. Looking back on the brazing I don’t think I’m going to do that for my actual shield, it was too difficult to control the melting metal and a kept burning through. Instead, I will take two pieces of a separate metal and then weld them on to the shield separately. I think I will keep looking for a different way to shape my shield. A big teal would be good but anything two feet in diameter would work.

Comments

Post a Comment

Popular posts from this blog

Daily Blog #15

Daily Blog #15 Thursday, May 16, 2019 I spent 6 hours in the gorge today. Today I did a lot. I cut out my second shield and put my handles on it. That took all morning and some of the afternoon. Once I finished my handle I started to polish off my spears and put the spears hands on the shafts. I finished polishing all but one of them which I will do tomorrow right before I put the decoration on my shield. I will also start to put handls on my swords and make them comfortable to handle. I think I made very good progress today and am in a very good position with my work.
Read more

Weekly Blog #3

Weekly Blog #3 Saturday, May, 18 This week was definitely the busiest week of the three so far. Every time I got a new idea I wanted to bring it to life and make it. Started off with spears. I put all the spearheads on the shaft and put screws in them so they would be stable. I Shields I finished putting the handles, decorations and the protective spray paint on all but two of my shields. I now have only two shields left to finish. I Made my last two today using the same technique as I used on my first one. I used a piece of wood that has been hollowed out in the middle so it creates a dip for the flat metal to sit on and when the hammer hits it and creates a divot in the metal and has a nice texture to it. I still need to put the handles and decoration on both of my shields and when I’m finished with that I will spray paint them with the protective coating. Once I have all my shields at the same stage I will spray paint them with color and that would be the end of my work on th...
Read more

Final paper

Ryan Methven Corby Leith Senior Project May 21, 2019 The  Forge Looking back to the beginning of this project and its planning stage, I would’ve never thought I could do what I’ve done. My original plan was to create one sword, one shield, and one spear. I have tripled that. I have gained more skills and knowledge than I thought I could with the time I had left, and I also managed to have more fun than expected as well. When I was still taking classes in the spring and I was planning out my senior project, my first choice was to go out west and work for a company called Outward Bound. This company mainly does studies on permaculture and wildlife. When I was on Mountain Classroom last spring, we did some work with them for a week, and I got really engaged with the work, as I was really intrigued about what they were doing. So when the senior project came around, I emailed the head of the company whom we met last spring, and I asked if I could come out and work for him a...
Read more